Here is the preview url to copy
+

https://www.fivesgroup.com/preview
Skip to main content

Terms & Conditions

CITCO Tools: Sales Order Confirmation

Fives Landis Corp. will not in any way be held responsible for any consequential or liquidated damages by using the product.

We hereby certify that these goods were produced in compliance with all applicable requirements of sections 6, 7 and 12 of the Fair Labor Standards Act as amended and of regulations and orders of the United States Department of Labor issued under section 14 thereof.

Blanket Orders: If Buyer's order is in the form of a blanket or open order (i.e., an order which specifies a quantity of goods to be shipped according to releases to be issued periodically by the Buyer or in a series of scheduled deliveries), then the following terms shall apply: (a) Once acknowledged by Seller, a blanket or open order may not be changed or cancelled by Buyer unless such change or cancellation is expressly agreed to in writing by an authorized representative of Seller.   Any such agreement to change or cancel an order may be conditioned upon Buyer paying a change or cancellation charge intended to compensate Seller for costs incurred, plus a reasonable amount for overhead and profit; and (b) Buyer further agrees that, unless otherwise specifically agreed to in writing by Seller, it must authorize all releases under a blanket or open order within twelve (12) months of Seller's acknowledgment of the order.

Warranty:  Products which under normal operating conditions in end user's plant are defective in workmanship or material will be repaired, replaced or credited, at the option of the Seller, at no charge to the Buyer for a period of twelve (12) months after shipment of the products from Seller's facility.  Seller shall have no obligation to repair or replace product damaged by misuse or failure of Buyer to provide appropriate storage and handling.  Seller will not assume responsibility for products returned to Seller without its prior consent or for unauthorized repairs to its products, even though defective.
THE WARRANTY EXPRESSED HEREIN IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND IS IN LIEU OF ANY AND ALL OTHER OBLIGATIONS OR LIABILITY ON SELLERS' PART.

Tool life estimates given by Seller are estimates only, based on Sellers's understanding of the machinability of material and its metallurgy, amount of material to be removed, machine capability, condition of the coolant or cutting fluids only, and do not constitute a warranty of production.

Limitation of Liability:  Buyer's sole remedy in respect of any defective product shall be to secure repair or replacement, thereof.  In no event shall Seller be liable for penalties or liquidated damages or for special, indirect or consequential damages, including loss of production and profits, labor and material expended, damage to work pieces, overhead costs, or other loss or expense incurred by Buyer, attributed to a defective product or to delay in delivery of any product sold hereunder.

All customer requirements, including those relative to ISO 9001:2015 have been met.

CITCO Tools: Quotations

All proposals, quotations or acknowledgments issued by Seller are an offer to sell products or services pursuant to the terms and conditions on the face of this quotation and as set forth below.  Seller objects to any additional or different terms contained in any documentation submitted by the Buyer. Seller’s acceptance of any order is contingent upon Buyer’s assent to these terms and conditions.  No waiver or modification of these terms and conditions shall be binding on Seller unless authorized in writing by Seller.  All sales are made subject to the following terms and conditions.
 
Shipment Terms: FCA Origin.
  
Payment Terms: Net 30 Days.
 
Blanket Orders: If Buyer's order is in the form of a blanket or open order (i.e., an order which specifies a quantity of goods to be shipped according to releases to be issued periodically by the Buyer or in a series of scheduled deliveries), then the following terms shall apply: (a) Once acknowledged by Seller, a blanket or open order may not be changed or cancelled by Buyer unless such change or cancellation is expressly agreed to in writing by an authorized representative of Seller.   Any such agreement to change or cancel an order may be conditioned upon Buyer paying a change or cancellation charge intended to compensate Seller for costs incurred, plus a reasonable amount for overhead and profit; and (b) Buyer further agrees that, unless otherwise specifically agreed to in writing by Seller, it must authorize all releases under a blanket or open order within twelve (12) months of Seller's acknowledgment of the order.
 
Warranty:  Products which under normal operating conditions in end user’s plant are defective in workmanship or material will be repaired, replaced or credited, at the option of the Seller, at no charge to the Buyer for a period of twelve (12) months after shipment of the products from Seller’s facility.  Seller shall have no obligation to repair or replace product damaged by misuse or failure of Buyer to provide appropriate storage and handling. Seller will not assume responsibility for products returned to Seller without its prior consent or for unauthorized repairs to its products, even though defective.
 
THE WARRANTY EXPRESSED HEREIN IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND IS IN LIEU OF ANY AND ALL OTHER OBLIGATIONS.
 
Tool life estimates given by Seller are estimates only, based on Seller’s understanding of the machinability of material and its metallurgy, amount of material to be removed, machine capability, condition of the coolant or cutting fluids only, and do not constitute a warranty of production.
 
Limitation of Liability:  Buyer’s sole remedy in respect of any defective product shall be to secure repair or replacement, thereof.  In no event shall Seller be liable for penalties or liquidated damages or for special, indirect or consequential damages, including loss of production and profits, labor and material expended, damage to work pieces, overhead costs, or other loss or expense incurred by Buyer, attributed to a defective product or to delay in delivery of any product sold hereunder.  In no event shall Seller’s liability for a claim of any kind arising out of the manufacture, sale or use of the products or services exceed the purchase price paid by Buyer.
 
Quotation valid for 60 days and subject to conditions as stated above.  Minimum order $100.00. 

Unless the parties have mutually agreed in writing to other terms and conditions to govern this order, the terms located on this webpage (“Terms and Conditions”) shall exclusively govern. Buyer expressly agrees to the Terms and Conditions and hereby attests it has read such Terms and Conditions. Performance by Fives Landis Corp. - CITCO Tools shall not be considered acceptance of any additional terms to the Terms and Conditions as referenced and incorporated herein. ADDITIONAL OR DIFFERING TERMS OR CONDITIONS INCLUDED OR REFERENCED IN BUYER’S PURCHASE ORDER, OR OTHERWISE, ARE HEREBY REJECTED UNLESS EXPRESSLY ACCEPTED IN WRITING BY AN AUTHORIZED OFFICER OF FIVES LANDIS CORP. - CITCO TOOLS.  

Gardner Abrasives: Quotations

All proposals, quotations or acknowledgments issued by Seller are an offer to sell products or services pursuant to the terms and conditions on the face of this quotation and as set forth below. Seller objects to any additional or different terms contained in any documentation submitted by the Buyer. Seller’s acceptance of any order is contingent upon Buyer’s assent to these terms and conditions. No waiver or modification of these terms and conditions shall be binding on Seller unless authorized in writing by Seller. All sales are made subject to the following terms and conditions.

Shipment Terms: FCA Origin.

Payment Terms: Net 30 Days.

lanket Orders: If Buyer's order is in the form of a blanket or open order (i.e., an order which specifies a quantity of goods to be shipped according to releases to be issued periodically by the Buyer or in a series of scheduled deliveries), then the following terms shall apply: (a) Once acknowledged by Seller, a blanket or open order may not be changed or cancelled by Buyer unless such change or cancellation is expressly agreed to in writing by an authorized representative of Seller. Any such agreement to change or cancel an order may be conditioned upon Buyer paying a change or cancellation charge intended to compensate Seller for costs incurred, plus a reasonable amount for overhead and profit; and (b) Buyer further agrees that, unless otherwise specifically agreed to in writing by Seller, it must authorize all releases under a blanket or open order within twelve (12) months of Seller's acknowledgment of the order.

Warranty: Products which under normal operating conditions in end user’s plant are defective in workmanship or material will be repaired, replaced or credited, at the option of the Seller, at no charge to the Buyer for a period of twelve (12) months after shipment of the products from Seller’s facility. Seller shall have no obligation to repair or replace product damaged by misuse or failure of Buyer to provide appropriate storage and handling. Seller will not assume responsibility for products returned to Seller without its prior consent or for unauthorized repairs to its products, even though defective.

THE WARRANTY EXPRESSED HEREIN IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND IS IN LIEU OF ANY AND ALL OTHER OBLIGATIONS.

Tool life estimates given by Seller are estimates only, based on Seller’s understanding of the machinability of material and its metallurgy, amount of material to be removed, machine capability, condition of the coolant or cutting fluids only, and do not constitute a warranty of production.

Limitation of Liability: Buyer’s sole remedy in respect of any defective product shall be to secure repair or replacement, thereof. In no event shall Seller be liable for penalties or liquidated damages or for special, indirect or consequential damages, including loss of production and profits, labor and material expended, damage to work pieces, overhead costs, or other loss or expense incurred by Buyer, attributed to a defective product or to delay in delivery of any product sold hereunder. In no event shall Seller’s liability for a claim of any kind arising out of the manufacture, sale or use of the products or services exceed the purchase price paid by Buyer. Quotation valid for 60 days and subject to conditions as stated above.

Minimum order $100.00.

Gardner Abrasives: Sales Confirmation

Fives Landis Corp. will not in any way be held responsible for any consequential or liquidated damages by using the product.

We hereby certify that these goods were produced in compliance with all applicable requirements of sections 6, 7 and 12 of the Fair Labor Standards Act as amended and of regulations and orders of the United States Department of Labor issued under section 14 thereof.

Blanket Orders: If Buyer's order is in the form of a blanket or open order (i.e., an order which specifies a quantity of goods to be shipped according to releases to be issued periodically by the Buyer or in a series of scheduled deliveries), then the following terms shall apply: (a) Once acknowledged by Seller, a blanket or open order may not be changed or cancelled by Buyer unless such change or cancellation is expressly agreed to in writing by an authorized representative of Seller. Any such agreement to change or cancel an order may be conditioned upon Buyer paying a change or cancellation charge intended to compensate Seller for costs incurred, plus a reasonable amount for overhead and profit; and (b) Buyer further agrees that, unless otherwise specifically agreed to in writing by Seller, it must authorize all releases under a blanket or open order within twelve (12) months of Seller's acknowledgment of the order.

Warranty: Products which under normal operating conditions in end user's plant are defective in workmanship or material will be repaired, replaced or credited, at the option of the Seller, at no charge to the Buyer for a period of twelve (12) months after shipment of the products from Seller's facility. Seller shall have no obligation to repair or replace product damaged by misuse or failure of Buyer to provide appropriate storage and handling. Seller will not assume responsibility for products returned to Seller without its prior consent or for unauthorized repairs to its products, even though defective.

THE WARRANTY EXPRESSED HEREIN IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND IS IN LIEU OF ANY AND ALL OTHER OBLIGATIONS OR LIABILITY ON SELLERS' PART.

Tool life estimates given by Seller are estimates only, based on Sellers's understanding of the machinability of material and its metallurgy, amount of material to be removed, machine capability, condition of the coolant or cutting fluids only, and do not constitute a warranty of production.

Limitation of Liability: Buyer's sole remedy in respect of any defective product shall be to secure repair or replacement, thereof. In no event shall Seller be liable for penalties or liquidated damages or for special, indirect or consequential damages, including loss of production and profits, labor and material expended, damage to work pieces, overhead costs, or other loss or expense incurred by Buyer, attributed to a defective product or to delay in delivery of any product sold hereunder.

All customer requirements, including those relative to ISO 9001:2015 have been met.